This product is no longer in stock
Bitscope BS05U + BNC MP01A adapter
Warning: Last items in stock!
BitScope is known for its data acquisition hardware offering appealing features. This model (proposed in this product) have been selected for the specifications and usages oriented toward the Makers. Please note that the BitScope is not intended to replace professional oscilloscopes (having wider range characteristics)!
Warning: the BitScope is not an autonomous device, it must be used with software running on computer or a Raspberry-Pi.
The bitscope Micro + 2 BNC connector adapter will allow you to plug BNC oscilloscope probe (not included) on the BitScope! The oscilloscope probes are suited to capture analog voltages and ease to use. The clip probes are suited for logical signal capture.
BitScope "Micro" Model 5, also named BS05, is a mix signals oscilloscope. It includes:
The BS05P model (this product) also have BNC connector to plug analog probes in (really convenient for measuring values).
The 3.3V signal generator (available on the AWG pin) would be a very handy tool to evaluate the response of the circuit at a given frequency or also when the frequency does change... great to évaluate an attenuator.
The BitScope is very compact and needs really few spaces in your toolbox (the bitscope is protected with transparent jacket). A dream for your test & measurement suite.
The BitScope can be completely automated by the user, it can simultaneous capture the digital signals and analog values in the 12 Kio buffer then continuously transfert the data to the host hard-drive.
Le BitScope software (that can be downloaded from the starter quick guide) shows a smooth and complete user interface.
|1||Main display||Displays the waveform, logical channels and spectral view. Displays measurement and cursors.|
|2||Feature selection||Virtual Instruments, Scope tools, Cursors, Presets, etc.|
|3||Triggers||Shows the triggers level (triggers), Waveforms (logical & analogs) at trigger time.|
|4||Trigger controls||Configuring the triggers (triggers)|
|5||Measurement cursors||Cursors values X and Y, voltages, timing and sampling rate.|
|6||Time base control||Time base, Zoom and control timing parameters|
|7||channel control||Sources controls, vertical position and scale.|
|8||datalogging control||Sampling rate for data acquisition, period, frame rate and display mode.|
BitScope Micro is compatible with many computer plateform like Raspberry Pi, Windows, Mac OS X and Linux running on x86 & ARM.
The Windows user would have to install the drivers for the BitScope to be detected (see the quick user guide for more informations)
Do not hesitate to download and install the software before purchasing your BitScope.
RasPiSHOP, une division de MCHobby SPRL - Site développé et réalisé par PYRANOID